NOTIFIER Battery Calculations versions

v2.4 [Jul 26, 2012]
 Corrected battery cabinet message for the ACPS-610. Message would incorrectly state that
batteries over 12AH would fit in the cabinet provided by the ACPS-610.
 Corrected a problem with the Voice Worksheet. There were some incorrect formulas in the
DS-DB sheet that would not report the current draw for Speakers and Speaker/Strobes after
selecting a Watt Tap.
 Fixed the Clear Selections and Show Selected Devices buttons on the AC Branch page of
the NFS2-640 sheet.
 Put the UDACT communicator back into appropriate sheets. The UDACT communicator was
inadvertently taken out in the version 2.3 release.
 Added the UDACT-2 communicator to compatible battery calculation sheets.
 Corrected the current draw for the PC2R15 in the Device Database.
 Corrected section numbering on Current Draw sheet for the NFS-320.
 Added the ability to take into account reverse polarity alarm and trouble current (for the main
circuit board and 4XTM) for the following control panels: SFP-2402, SFP-2404, RP-2001, RP-
2002, SFP-5UD, SFP-10UD, NFW-50, and NFW2-100.
 Corrected current draw for the main circuit board for the RP-2001/2002, SFP-5UD, and SFP-
10UD and also added ANN-SEC Card to each sheet.
 Corrected Total current draw cells formulas on the Current Draw sheet of the SFP-10UD
battery calculation.
 Added IDC circuit alarm draw for all intelligent modules (FZM-1, XP6-MA, NZM-100, and
NZM-100-6) to all applicable battery calculations. All conventional initiating devices will now
have a 0 amp current draw in alarm, this draw will be handled by the IDC circuit alarm draw.
Each IDC circuit will be given a maximum draw in alarm that will be used per circuit for all
conventional applications.
 Redesigned the NFS2-3030 battery calculation to match the manual. Users are now able to
add devices on either the Main 24V output or the Auxiliary 24V output.